home *** CD-ROM | disk | FTP | other *** search
- -----
- March 5, 1987
-
- You must be using version 1.03 of the Windows
- operating environment. This is the version bundled
- with PageMaker during the first 90 days of
- PageMaker's shipping. Using an earlier version
- will interfere with text justification and kerning,
- and may cause other problems.
-
- If you have questions or problems with the files
- included on this disk, contact Aldus Technical
- Support at (206) 628-2320. Hours are 7 a.m. to 6
- p.m., Pacific Standard Time. Be sure to have
- either your PageMaker serial number or your Service
- Contract number handy when you call. It will also
- help if you call from a phone beside your computer.
-
- ADDING UPDATED PRINTER DRIVERS TO YOUR SYSTEM
-
- 1. Start Windows. If you installed PageMaker
- with the run-time version of Windows, type PM,
- then press the Enter key to start Windows and
- PageMaker. If you installed the retail version
- of Windows, type WIN, then press the Enter key
- to go to the MS-DOS Executive. The MS-DOS
- Executive is a window that gives you access to
- DOS commands, as well as to applications and files,
- from within the Windows operating environment.
-
- 2. Start the program CONTROL.EXE. If you are
- running PageMaker with the run-time version of
- Windows, choose the "Control Panel" command
- from PageMaker's System menu. The System menu is
- the small striped box in the upper-left corner
- of your screen. Position the mouse pointer
- on the box, then drag the mouse down until the
- command "Control Panel" is highlighted. When you
- release the mouse button, Windows displays the
- Control Panel.
-
- If you are running the MS-DOS Executive in
- Windows, position the mouse pointer on the program,
- CONTROL.EXE, and double-click the mouse button
- (press it twice in rapid succession). Windows
- displays the Control Panel.
-
- 3. Delete the existing installed PostScript and/or
- PCL (HP) printer drivers, using the "Delete
- Printer" command from the Installation menu.
-
- 4. Use the "Add new printer..." command from the
- Installation menu to install the updated drivers
- into Windows. When it asks if you want to copy the
- drivers to Windows' directory, say "yes". Add
- either or both of the printer drivers HPPCL.DRV and
- PSCRIPT.DRV to your system.
-
- 5. Select the "Connections" command from the Setup
- menu, and indicate which printers are connected to
- which ports. For any printer connected to a serial
- port, also use the "Communications Port..." command
- to specify communications settings. If you wish
- one of the printers to be the Windows default
- printer, specify this using the "Printer" command
- from the Setup menu.
-
- -----